Sunday, November 9, 2008

Flywheel - Building codes - ABC’s of Avoiding Claims


If you have built, are building or planning to build there are likely times when you have wondered why building departments do the things that they do. Local jurisdictions that elect to handle building permits, yes you could live in a home that never had building permits and inspections, face the challenge of protecting the pubic safety and health (and now reducing the carbon footprint) as well as protecting against future liability. After the leaky condo crisis many municipalities have written bylaws and improved internal policies to reduce risk (some have not), which have led to builders and owners getting frustrated on the amount of red tape to work through. In future newsletters we will discuss the importance of codes, bylaws and keeping proper records and taking more responsibility as the owner. But for now we will start with a list prepared by Frank Cowan Company Ltd (who specialize in risk management for municipalities), which outlines what a Building Inspector should do to avoid claims and it may shed some light on why they do the things they do or could do better.

Avoid acting as a consultant

Be aware of changes to construction, which may require revised plans.

Communicate to potential new buyers any outstanding orders or open permits.

During inspection, document deficiencies, issue orders when necessary and follow-up to ensure compliance.
Ensure drawings are sealed by an architect or professional engineer where appropriate.

Files and records should be kept in accordance with the Statue of Limitations.

Get to know your builders. Which ones will follow the building code and which ones will take short cuts.

Have procedures for consistent plan reviews.

Inspections completed today will need to stand the test of time. Remember the subsequent owner.

Judges rely on documentation to formulate a decision. What will your documents reveal about the inspection?

Keep you documentation consistent and objective. Checklists will allow you to do this. It is also an excellent tool to ensure a complete inspection.

Liability for negligent building inspection arises at the plan approval stage and the on-site inspection stage.

Municipalities that make a decision to conduct building inspections are at law, held to owe duty to the individual property owners, future property owners and the public at large to properly review plans, issue building permits and conduct inspections.

Never admit liability.

Owner acting as the Builder is a potential red flag.

Plans submitted should be detailed enough to carry out a proper review. Do not expect less.

Qualified persons are required to prepare plans for building permits.

Remember to follow up on deficiencies found during permits.

Safety of the present owner, future owner and potential visitors to a property must be considered, particularly associated with an occupancy.

The building code is your bible. Refer to it when in doubt.

Understand that by the time a claim is made, the municipality may be the only defendant left to sue. Other parties may have gone bankrupt, may not exist or may not have liability policies that will respond.

Verify that all required documentation has been received before issuing a permit.

What length of time do you allow inactive permits to remain open? Why do you allow them to remain open?

X’pect a red flag when the contractor is working outside of his usual expertise or is a new builder.

You have the power to order work to be uncovered when it is covered before you’ve inspected.

Zero in on the aspects of construction within the Building Code that are related to health, safety and structural stability.

Code Design Build

Blogs I Follow